Adults reading silently read about 238 words per minute on non-fiction and about 260 on fiction, on average. Here is where those numbers come from, why they move, and how to measure your own without fooling yourself.
The short answer
The most thorough recent figure comes from Marc Brysbaert's 2019 review and meta-analysis of reading-rate studies, which pooled the results of many published experiments. For adults reading silently in their first language, the average was about 238 words per minute for non-fiction and about 260 for fiction. These are averages for people who understand what they read. A speed of 200 to 300 words per minute is therefore ordinary, not slow.
Averages hide a lot, though. Two readers with the same ability can differ by a hundred words per minute on different texts, and the same person differs from day to day.
What changes your reading speed
- The text. Easy, familiar material is read faster than dense or technical material. Fiction is read a little faster than non-fiction, as the two averages above show.
- Your purpose. Reading to memorize is slower than reading for the gist, and skimming is faster still. This matters so much that it gets its own section below.
- Your background knowledge. Readers who already know a topic read about it faster, because they need to work out less.
- Vocabulary and practice. Skilled readers recognize more words instantly. This is the part that changes most with years of reading.
- The medium. See the section on paper and screens.
Purpose sets the pace
The psychologist Ronald Carver proposed that readers shift between five "gears" depending on what they are trying to do. The speeds below are his estimates for college-level readers. They are approximate, and pooled data from later studies put ordinary reading somewhat lower than his middle figure, but the ordering is the useful part.
| What you are doing | Carver's estimate |
|---|---|
| Memorizing the text | about 138 words per minute |
| Learning from the text | about 200 |
| Ordinary reading for understanding | about 300 |
| Skimming | about 450 |
| Scanning for one fact | about 600 |
The practical reading is this: when someone reports 600 words per minute, they are probably describing scanning, and the right question is how much of the text they could then recall. If you are studying, a speed near 200 is not a problem to fix. It is what learning from text looks like.
Aloud, audiobooks and silent reading
Speech is slower than silent reading. Narrated audiobooks run at roughly 150 words per minute, and people speaking naturally are in the same neighborhood. Silent readers outpace that, which is why a transcript is quicker to take in than a recording, and why you cannot set your reading speed by how fast you would say the words.
Paper versus screen
Two meta-analyses, by Delgado and colleagues (2018) and by Clinton (2019), compared reading on paper with reading on screens. Both found a small advantage for paper in how well readers understood the text, and Delgado and colleagues found the effect larger for informational text and when readers were under time pressure. The differences are modest, but they are a reason to keep the medium the same when you compare your own scores across weeks.
Why you cannot compare across languages
A word in one language is not the same amount of text as a word in another. Words differ in length and in how much information they carry, so a words-per-minute figure from a study in English says little about a Korean, Finnish or Chinese reader. This site counts a word as a run of characters between spaces. Our Korean pages count the Korean equivalent (어절), and the two figures should not be set side by side.
Measuring your own speed fairly
- Use text of the kind you actually read, at a normal pace, without looking away.
- Check comprehension. Speed without a comprehension check measures how fast you moved your eyes.
- Use the effective speed (words per minute multiplied by the share of questions answered correctly) as your headline figure.
- Average at least three different passages. A single reading is noisy.
The reading speed test on this site does exactly that with ten passages.
Take the reading speed testFrequently asked questions
Is 200 words per minute slow?
No. It is inside the ordinary adult range and close to the speed Carver estimated for learning from a text. Slower reading is normal for dense or unfamiliar material.
Is 300 words per minute fast?
It is somewhat above the pooled average of about 238 for non-fiction, but within the normal range. On easy fiction it is common. On dense text, a speed this high can mean you are skimming, so check your comprehension.
Can I compare my English and Korean reading speeds?
Not directly. Words differ in length and information across languages, so words per minute in one language does not match words per minute in another.
Sources
- Brysbaert, M. (2019). How many words do we read per minute? A review and meta-analysis of reading rate. Journal of Memory and Language, 109, 104047.
- Carver, R. P. (1992). Reading rate: Theory, research and practical implications. Journal of Reading, 36(2), 84–95.
- Clinton, V. (2019). Reading from paper compared to screens: A systematic review and meta-analysis. Journal of Research in Reading, 42(2), 288–325.
- Delgado, P., Vargas, C., Ackerman, R., & Salmerón, L. (2018). Don't throw away your printed books: A meta-analysis on the effects of reading media on reading comprehension. Educational Research Review, 25, 23–38.